FactoryCat MICROMINI Floor Scrubber

Factory Cat’s MICROMINI Floor Scrubber is known for its simple design and durable construction, offering unmatched value for the customer. The MICROMINI Walk Behind Floor Scrubber comes equipped with a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease or a Pad Assist version.

Your operators will find the MICROMINI Floor Scrubber easy to maneuver into tight areas, and simple to service. The deck is protected by steel guards and large polyurethane rollers to keep the unit from marking walls.

Used equipment availability changes frequently. Contact us to confirm inventory.

Technical Specifications	FactoryCat MICROMINI
Length	42 in
Width	21 in
Height	39 in
Weight without Batteries	215–315 lbs
Weight with Batteries	380–480 lbs
Chassis Construction	1/8-in powder-coated steel
Front Wheels	Two 8 × 2 in non-marking wheels
Rear Wheels	Two 2.5 × 1.38 in non-marking wheels
Disc Options	One 17-in or one 20-in disc
Disc Motor	0.75 hp / 559 W
Disc Brush Speed	200 rpm
Orbital Pad Options	20 × 14 in or 24 × 14 in
Orbital Motor	1 hp / 745 W
Orbital Motor Speed	2,500 rpm
Maximum Brush Down Pressure	100 lbs
Actuator Rating	500 lbs
System Voltage	24 VDC
Standard Battery	130 Ah wet
Optional Battery	Up to 150 Ah wet or 115 Ah AGM
Charger	Onboard
Runtime	Up to 3 hours
Drive Motor	0.75 hp, all-gear/sealed
Maximum Forward Speed	2.6 mph
Maximum Scrubbing Speed	2 mph
Maximum Reverse Speed	1.5 mph
Solution Tank Capacity	10 gal
Recovery Tank Capacity	10 gal
Solution Flow	0–0.5 gpm
Demisting Chamber Capacity	1.25 gal
Drain Saver Capacity	30 in³
Vacuum Motor	0.8 hp, three-stage / 640 W
Vacuum Water Lift	70 in
Vacuum Airflow	70 cfm
Theoretical Productivity	Up to 15,748 ft²/hr
Practical Productivity	Up to 7,308 ft²/hr

RESOURCES

If you don’t see the resource you need, please contact us directly.